MasterFlow 410 - Low exotherm, high strength, flowable epoxy resin grout

How does MasterFlow 410 work?

Masterflow 410 is a solvent-free low exotherm,filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications. It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable for voids of 50-150mm

Recommended uses:

  • Machinery with high dynamic loads and vibration.
  • Backing of steel liners of ore crushing machinery in mines and quarries.
  • In corrosive environments where chemicals, oils and solvents make cementitious grouts unsuitable.
  • Production line equipment that must resume operations with minimum downtime.
  • Machinery base plates, crane rails, anchor bolts, hold down bolts and heavy equipment where tensile strength greater than cementitious systems can provide are required.

What makes MasterFlow 410 a unique solution?

Masterflow 410 is a High strength precision grout that can be applied in higher thickness of upto 150mm and enables faster return to service

What are the features and benefits of MasterFlow 410?

  • Resistance to vibration and impact – Particularly applicable where cycles of compression/ tension make cementitious grouts unsuitable
  • Minimum shutdown – Low exotherm allows for thick single pours especially for a shutdown.
  • Excellent chemical resistance – Maximum protection against attack from mineral acids, oils, fats, fuels, and strong alkali and salt solutions and lubricating and hydraulic oils
  • High bond strength – Tenacious adhesion to prepared surfaces and requires no priming.
  • Supplied in pre-measured kits – Eliminates the need for complicated on-site measuring and ensured product performance

MasterFlow 150

MasterFlow 410

MasterFlow 648

- Low creep, high steingth, high flow, high temperature epoxy grout

MasterFlow 928T

MasterFlow 622

- Heavy duty epoxy resin grout

MasterFlow 788

- Non-shrink, cementitious grout for under water applications

MasterFlow 810

- Non-shrink, cementitious grout for use in general civil engineering works

MasterFlow 870

- Cementitious high strength, non-shrink precision grout