MasterSeal 910 - Water swelling waterbar for joints

How does MasterSeal 910 work?

When in contact with water the MasterSeal 910 Waterbars will slowly increase in volume (swell) without changing the homogeneous structure of the polymer matrix. The increase in volume by the swelling action can be up to 200% (depending on type of water). The pressure of the swelling action will cause the MasterSeal 910 Waterbar to profile itself exactly into the joint filling all cavities and effectively stopping water seepage, even at high external water pressure.

The MasterSeal 910 Waterbars will not transport water through their polymer matrix and thus not act as a capillary duct. The swelling action is limited to the sides exposed to water.

Recommended uses:

MasterSeal 910 Waterbar is suitable for all construction joints subject to hydrostatic pressure, on one or both sides. MasterSeal 910 provide simple but efficient waterproofing of construction joints.

What makes MasterSeal 910 a unique solution?

MasterSeal 910 is a hydro-swelling waterbar, ready for installation in construction joints to render the joints leak proof. It is based on specially designed polymer composite that acts by undergoing reversible swelling on exposure to water to form an effective seal.

What are the features and benefits of MasterSeal 910?

MasterSeal 910 is based on a newly developed polymer technology providing flexible polymer composites which have high chemical resistance capable of storing water in their molecular structure by increasing their volume.

MasterSeal 910 provides simple but efficient waterproofing of construction joints. Movements in the joint, e.g. by shrinkage or settlement in the substrate, are taken up by the elastic profile of the MasterSeal 910 Waterbar. MasterSeal 910 has been successfully employed to waterproof joints where an opening of up to 5mm was deliberately created. Water pressure of up to 5 bar was sealed.

MasterSeal 378

- Acrylic waterproofing membrane for solar reflective membrane system

MasterSeal 501/502

- Deep penetrative, reactive, capillary waterproofing system for concrete and mortar

MasterSeal 505

- Ultra-rapid setting mortar to plug active water leaks in concrete and masonry

MasterSeal 530

- Surface applied capillary waterproofing for concrete and mortar

MasterSeal 540

- Flexible, cementitious waterproofing membrane

MasterSeal 898

- Rapid curing, chemical resistant & waterproofing membrane

MasterSeal 901

- Vinyl Ester Methacrylate resin for crack injection via injection hoses and packers

MasterSeal 909

- Re-injectable hose waterstop system for construction and cold joints in concrete

MasterSeal CR 170

- 2-component joint sealant, non-sagging, polysulphide-based, chemical resistant with European Technical Approval

MasterSeal CR 171

- 2-component joint sealant, pourable, polysulphide-based, chemical resistant with European Technical Approval

MasterSeal CR 460

- Polyurethane joint sealant

MasterSeal GG 470

- High Performance, Elastomeric Joint Sealant (Gun Grade)

MasterSeal M 388

- Solar radiation reflective waterproofing system top coat

MasterSeal PG 470

- High performance, elastomeric joint sealant (Pouring Grade)

MasterSeal Traffic 2205

- Exposed, crack bridging, skid resistant, car park deck waterproofing system with spray applied membrane

MasterSeal Traffic 2255

- Trafficable waterproofing system for parking floors

MasterSeal Traffic 2262

- An exceptionally hard wearing coating system

MasterSeal Traffic 2271

- Economical glossy car park deck coating system

MasterSeal 345

– Waterproofing membrane

MasterSeal 550

- Flexible, cementitious waterproofing membrane

MasterSeal 581

- A waterproof cement-based coating for concrete and masonry

MasterSeal 590

- One-component, cement-based, fast-setting water-stop repair mortar

MasterSeal 600

- Special formulation of acrylic polymers and modifiers designed for use as an additive for cement mixes and other highly-alkaline building materials

MasterSeal 910

- Water swelling waterbar for joints

MasterSeal 912

MasterSeal HLM 5000

- Liquid, cold-applied elastomeric waterproofing membrane system

MasterSeal NP 472

- One part polyurethane based elastomeric joint sealant

MasterSeal NP 474

- Single component, high modulus polyurethane joint sealant for floors

MasterSeal Roof 3500

- Liquid applied crack bridging waterproofing membrane

MasterSeal Traffic 1500 MD

- Medium duty traffic deck crack-bridging waterproofing system

MasterSeal Traffic 2000 HD

- Traffic deck crack-bridging waterproofing system

MasterSeal Traffic 2500 HD

– Fast return to service Traffic deck crack-bridging waterproofing system

Downloads

MasterSeal 910: Technical Data sheet

pdf (222.79 Kb)